国外驾照换国内驾照流程保山

1. When a motorized vehicle goes at night through an intersection that has no traffic lights, the driver should not use the high and low beam lights alternately.

Answer: N

2. When driving in thick or extremely thick fog, the driver should ____ due to low visibility.

A. Turn on the head light and keep driving

B. Turn on the contour light, fog light and drive along the right side

C. Turn on the hazard lights and keep driving

D. Turn on the hazard lights, fog light, and stop at a safe place

Answer: D

3. Traffic Police can detain the driver according to law, if the driver drives a motorized vehicle which is suspected of reaching the write-off standard.

Answer: N

4. When a motorized vehicle encounters the cut in by another vehicle in a roundabout, the driver may not evade as long as he has the right of way.

Answer: N

5. Stop the vehicle and observe when reaching the level crossing in this situation.

Answer: Y

6. When encountering a vehicle in the opposite direction forcing its way by using his lane, the driver should __________.

A. Force the other side to drive by the right side

B. Use the high beam light to warn the other side

C. Voluntarily yield to the other side

D. Go ahead by the center of the road

Answer: C

7. How to drive in this section?

A. occupy the road of the other side to pass the curve

B. drive along the middle of the curve

C. speed up and honk to pass

D. reduce speed and honk

Answer: D

8. When running on an expressway, the driver should ____ if he has missed the exit.

A. Reverse to the original place

B. Continue to go ahead and find the next exit

C. Immediately stop

D. Make a U turn from where he is

Answer: B

9. A motorized vehicle is not allowed to make a U turn at the level crossing, bridge, steep slope, tunnel or dangerous road section.

Answer: Y

10. When a vehicle encounters a bike rider coming in the opposite direction on the road, the driver should _________.

A. Continuously change the high and low bean lights

B. Continuously honk

C. Use the low beam light, reduce speed or stop to evade

D. Use the high beam light

Answer: C

11. When a motorized vehicle breaks down at night, and is difficult to move, the driver should turn on the hazard lights, the contour lights and the tail lights.

Answer: Y

12. When a vehicle on the main road approaches a conjunction with a feeder road, the driver should ______ in order to prevent a collision with a vehicle that suddenly enters from the feeder road.

A. Maintain the normal speed

B. Reduce speed in advance, observe and drive with care

C. Honk and swiftly pass

D. Speed up in advance and pass

Answer: B

13. You can make an U turn at this intersection.

Answer: N

14. When reversing on an ordinary road and discovering some vehicles are passing, the driver should _________.

A. Honk to indicate the intention

B. Voluntarily stop and yield

C. Speed up and reverse

D. Continue to reverse

Answer: B

15. The method of this small passenger vehicle to leave the expressway lane is correct.

Answer: Y

16. When the vehicles cross each other at night, the driver may continuous change lights to remind the vehicle coming in the opposite direction and at the same should reduce speed and go forward or stop on the right side.

Answer: Y

17. The wrong measure to avoid tire blowout is to _________.

A. Reduce tire pressure

B. Check the tires regularly

C. Remove objects from tire tread grooves in a timely manner

D. Replace the tire that has cracks or deep cuts

Answer: A

18. When a vehicle wades across the water, the driver should maintain a low speed, and _____ the brake pedal so as to restore the braking efficiency.

A. Continuously and strongly depress

B. Intermittently and strongly depress

C. Continuously and gently depress

D. Intermittently and gently depress

Answer: D

19. Using the low beam light in such circumstances.

Answer: Y

20. At this position, you may speed up to pass through the section.

Answer: N