国外驾照换国内驾照流程海口

1. The main impact of rainy weather on safe driving is _______.

A. The road is wet and slippery and the visibility is poor

B. The engine is prone to stop

C. The resistance to the vehicle increases

D. The electric equipment is prone to getting wet and causing short circuit

Answer: A

2. What is the max speed on the expressway when the visibility is lower than 200m?

A. less than 100km/hr

B. less than 90km/hr

C. less than 60km/hr

D. less than 80km/hr

Answer: C

3. When driving in a foggy day, the driver should turn on ______.

A. The reverse light

B. The low beam light

C. The fog light

D. The high beam light

Answer: C

4. How far should be the distance from the vehicle in front at the speed of more than 100 km/hr when driving a small passenger vehicle on the expressway?

A. more than 50 meters

B. more than 60 meters

C. more than 100 meters

D. more than 80 meters

Answer: C

5. When driving in icy and snowy weather, the vehicle steadiness decreases and sudden acceleration can very easily cause spins and slides.

Answer: Y

6. When a vehicle encounters a bike rider coming in the opposite direction on the road, the driver should _________.

A. Continuously change the high and low bean lights

B. Continuously honk

C. Use the low beam light, reduce speed or stop to evade

D. Use the high beam light

Answer: C

7. When a vehicle is being overtaken by another vehicle, the driver should _____.

A. Run by the central line of the road

B. Speed up and yield

C. Continue to speed up and run

D. Reduce speed and run on the right side

Answer: D

8. At this position, you may speed up to pass through the section.

Answer: N

9. Max speed when pass the narrow road or bridge is _______

A. 50km/hr

B. 40km/hr

C. 30km/hr

D. 60km/hr

Answer: C

10. Driving in a dusty weather, it does not needed to turn on the head light, the contour light and the tail light.

Answer: N

11. The main impact of the road conditions at night on safe driving is ________.

A. The visibility is low and unfavorable for observing road traffic conditions

B. The road surface is complex and changing

C. The physical strength of the driver decreases

D. The driver can easily have impulse and illusion

Answer: A

12. When a motorized vehicle breaks down at night, and is difficult to move, the driver should turn on the hazard lights, the contour lights and the tail lights.

Answer: Y

13. When a vehicle on the main road approaches a conjunction with a feeder road, the driver should ______ in order to prevent a collision with a vehicle that suddenly enters from the feeder road.

A. Maintain the normal speed

B. Reduce speed in advance, observe and drive with care

C. Honk and swiftly pass

D. Speed up in advance and pass

Answer: B

14. When a vehicle passes a bumped road, the driver should ________.

A. Speed up and dash over under inertia

B. Change to the neutral gear and slide over

C. Maintain the original speed and pass

D. Pass slowly and steadily

Answer: D

15. Using the low beam light in such circumstances.

Answer: Y

16. What is the max speed when passing this curve?

A. 40km/hr

B. 30km/hr

C. 50km/hr

D. 70km/hr

Answer: B

17. When the green light at a congested intersection is on, the vehicles _______.

A. May directly enter the intersection

B. Cannot enter the intersection

C. May pass the intersection by borrowing the opposite lane

D. Enter the intersection if it is safe to do so

Answer: B

18. What is the max speed when down slope, turning around and U turn?

A. 50km/hr

B. 60km/hr

C. 30km/hr

D. 40km/hr

Answer: C

19. When the vehicles cross each other at night, the driver may continuous change lights to remind the vehicle coming in the opposite direction and at the same should reduce speed and go forward or stop on the right side.

Answer: Y

20. When the fire engine, ambulance and wrecker are executing an emergency task, other vehicles should yield.

Answer: Y