迪庆摩托车科目四仿真考试

1. How to ensure motor vehicles have sufficient power when driving uphill?

A. Downshift before reducing speed

B. Downshift after reducing speed

C. Downshift when the speed is excessively low

D. Downshift to the fullest extent

Answer: A

2. When approaching another vehicle at night, why should the driver alternate between high-and-low-beam at a distance more than 150 meters?

A. Warn each other before passing

B. Driving habit

C. Easy to observe the situation ahead from either side

D. Courtesy

Answer: C

3. What is the meaning of this sign?

A. Bypass from left side

B. Continuous curves

C. Sharp left curve

D. Sharp right curve

Answer: C

4. The first-aid measure to rescue a poisoned person is to _______.

A. Take warming-up measures

B. Bring him to a place where air is fresh

C. Give him artificial respiration

D. Depress the heart over the chest

Answer: B

5. How to reduce speed or stop when driving on a road covered with snow and ice?

A. Take full advantage of driving brake

B. Take full advantage of the control power from engine

C. Take full advantage of parking brake

D. Take full advantage of speed retarder

Answer: B

6. What is the meaning of this sign?

A. More vehicles section

B. Passing slowly

C. Jammed section

D. Construction section

Answer: B

7. What is the meaning of this sign?

A. Reduce speed and go slowly

B. Watch for danger

C. Jammed section

D. Accident-prone section

Answer: B

8. What is the meaning of this sign?

A. Driving at reduced speed in the section of 40 meters

B. Minimum speed is 40km/hr

C. Maximum speed is 40km/hr

D. 40km/hr speed limit ban is lifted

Answer: D

9. What is the meaning of this sign?

A. Watch for pedestrians

B. Watch for children

C. School area

D. Crosswalk

Answer: A

10. What is the meaning of this sign?

A. Special lane for small vehicles

B. Special lane for motorized vehicles

C. Special lane for taxis

D. Special lane for multi-passenger vehicles

Answer: D

11. When two vehicles approach each other on a foggy day, what is the best method of safe driving?

A. Turn on the high-beam

B. Slowdown and maintain a large safety distance

C. Turn on the low-beam

D. Turn on the fog lamp

Answer: B

12. How should lamps be used when a motor vehicle meets an oncoming bicycle on a narrow road or a narrow bridge at night?

A. Continuously change between low-beam and high-beam

B. Use clearance lamp

C. Use high-beam

D. Use low-beam

Answer: D

13. What is the meaning of this sign?

A. No changing lane

B. No left turn

C. No going straight

D. No U turn

Answer: D

14. When a gas tanker is leaking heavily, which of the following measures is wrong?

A. Cut off the power

B. Wear gas mask and protect gloves

C. Turn off the valve to stop leaking

D. Evacuate people to the leeward side

Answer: D

15. What is the meaning of this sign?

A. Hump bridge

B. High outburst road

C. Low-lying road

D. Bump road

Answer: A

16. Rescue personnel should check the breath of the unconscious person before applying any other emergency treatment.

Answer: Y

17. When driving on a long downhill road, which is the best way to control driving speed?

A. Coast in neutral gear

B. Depress the clutch and coast

C. Use the engine to brake

D. Depress the brake pedal continuously

Answer: C

18. When the wounded person is suffering main artery bleeding, where should the rescue personnel press by thumb to stop the bleeding?

A. The artery near the heart

B. The artery lower to the wound

C. The artery further from the heart

D. The artery in the center of the wound

Answer: A

19. What is the meaning of this sign?

A. Muddy road

B. Low-lying road

C. Overflowing road

D. Ferry

Answer: C

20. When a motor vehicle temporarily stops in fog, which lamp should be turned on?

A. Hazard lamp, clearance lamp and rear position lamp

B. Left-turn indicator, clearance lamp and rear position amp

C. Headlamp, clearance lamp and rear position lamp

D. Reverse lamp, clearance lamp and rear position lamp

Answer: A