三明摩托车科目四英文版电子题库

1. What is the meaning of this sign?

A. No entry for bicycles

B. Lane for non-motorized vehicles

C. Special lane for bicycles

D. Bicycle stopping area

Answer: B

2. What is the meaning of this sign?

A. Slippery section

B. Sharp curve

C. Inverse curve

D. Continuous curves

Answer: D

3. When driving on road sections where safe sight distance is affected, such as the top of a ramp, what should drivers do to ensure safety?

A. Rush through

B. Use hazard lamp

C. Cut speed and sound the horn

D. Drive at will

Answer: C

4. At the scene of a traffic accident, once there is a leakage of toxic and harmful substances, people must be evacuated at the first time and alarmed immediately.

Answer: Y

5. Which lamp should be turned on when motor vehicles pass through a road section at night where the street light condition is good?

A. Front and rear fog lamps

B. Low-beam

C. High-beam

D. Hazard lamp

Answer: B

6. When a motor vehicle stops temporarily in a rainy day,which lamp should be turned on?

A. Front and rear fog lamps

B. Hazard lamps

C. Headlamps

D. Reverse lamps

Answer: B

7. Once inflammable gas causes a fire disaster, it should be put out with water in good time.

Answer: N

8. What is the meaning of this sign?

A. School area

B. Watch for children

C. Crosswalk

D. Watch for pedestrians

Answer: B

9. When the tire pressure is too low, what can happen when driving at a high speed?

A. Tire pressure will be unstable

B. Tire pressure will increase

C. Driving resistance will decrease

D. The tire will burst

Answer: D

10. How to ensure motor vehicles have sufficient power when driving uphill?

A. Downshift before reducing speed

B. Downshift after reducing speed

C. Downshift when the speed is excessively low

D. Downshift to the fullest extent

Answer: A

11. How should lamps be used when a motor vehicle meets an oncoming bicycle on a narrow road or a narrow bridge at night?

A. Continuously change between low-beam and high-beam

B. Use clearance lamp

C. Use high-beam

D. Use low-beam

Answer: D

12. How to ensure safe driving at night?

A. Drive at speed limit

B. Cut speed and drive carefully

C. Maintain the current speed

D. Drive above the speed limit

Answer: B

13. Which of the following measures is incorrect when a motor vehicle stops?

A. Stop at a stipulated place

B. Avoid stopping on pedestrian streets

C. Avoid obstructing the passing of other motor vehicles and pedestrians when temporarily stops on the road

D. Stop on the non-motor vehicle lane

Answer: D

14. What is the meaning of this sign?

A. No stopping temporarily

B. No long stopping

C. No stopping

D. Long stopping is allowed

Answer: B

15. The wrong method to rescue a poisoned person in a traffic accident is to ______.

A. Bring him to a place where air is fresh

B. Take off clothes that are exposed to toxic air

C. Clean exposed areas with clean water

D. Stay in the original place and wait for the rescue personnel

Answer: D

16. When following other vehicles on a foggy day, what should the driver do?

A. Maintain a large safety distance

B. Turn on the high-beam

C. Turn on the low-bea

D. Sound the horn in due time

Answer: A

17. When rescuing the injured, it is necessary to ________.

A. Save life first and treat the wounds later

B. Treat the wounds first and safe life later

C. Help the slightly wounded persons first

D. Help the seriously wounded persons later

Answer: A

18. What is the meaning of this sign?

A. No going straight and no changing to left lane

B. No going straight and no left turn

C. Allowed to go straight and turn left

D. No going straight and no right turn

Answer: B

19. What is the meaning of this sign?

A. Customs inspection

B. Stop-for-inspection

C. Frontier inspection

D. No passing

Answer: B

20. When a wounded person is under the wheel or cargo, the wrong method is to pull the limbs of the wounded.

Answer: N