阳江摩托车科目四仿真考试

1. How to ensure motor vehicles have sufficient power when driving uphill?

A. Downshift before reducing speed

B. Downshift after reducing speed

C. Downshift when the speed is excessively low

D. Downshift to the fullest extent

Answer: A

2. When encountering an obstacle on one side of the road, what should vehicles do as they approach each other?

A. The vehicle not encountering an obstacle should Yield to the other vehicle

B. The slower vehicle should yield to the faster

C. The vehicle encountering an obstacle should yield to the other vehicle

D. The faster vehicle should yield to the slower

Answer: C

3. What is the meaning of this sign?

A. Watch for long time honking

B. An unmanned level crossing

C. A manned level crossing

D. Multi-crossing of railway and road

Answer: B

4. How will the adhesive force of road change when speed increases on a damp and slippery road?

A. Increase sharply

B. Increase gradually

C. Decrease sharply

D. No change

Answer: C

5. What is the meaning of this sign?

A. Stopping temporarily is allowed

B. Long stopping is allowed

C. No long stopping

D. No stopping

Answer: D

6. What is the meaning of this sign?

A. No left turn

B. Leftt and right turn

C. No leftt and right turn

D. No right turn

Answer: B

7. How should lamps be used when motor vehicle drivers pass through a two-way tunnel?

A. Turn on the hazard lamps

B. Turn on the high-beam

C. Turn on the fog lamp

D. Turn on the low-beam

Answer: D

8. When evading an emergency, except for being calm what principle should be held by drivers?

A. Evading people first and then objects

B. Evading objects first and then vehicles

C. Evading vehicles first and then people

D. Evading objects first and then people

Answer: A

9. When rescuing a wounded person suffering spinal fracture, it is necessary to ___________.

A. Take warm-keeping measure

B. Use soft stretcher to carry

C. Use sling to keep in position

D. Help the wounded person to move

Answer: C

10. Which lamp should be turned on when motor vehicles pass through a road section at night where the street light condition is good?

A. Front and rear fog lamps

B. Low-beam

C. High-beam

D. Hazard lamp

Answer: B

11. What should be checked before driving?

A. No parts need to be checked

B. Whether the tires have been cleaned

C. Where the spare tire is placed

D. The fastening and air pressure of tires

Answer: D

12. What is the meaning of this sign?

A. Reducing speed 40m ahead

B. Minimum speed is 40km/hr

C. Axle weight limit is 40 tons

D. Maximum speed limit is 40km/hr

Answer: D

13. What is the meaning of this sign?

A. Customs inspection

B. Stop-for-inspection

C. Frontier inspection

D. No passing

Answer: B

14. When there is no bondage for rescuing a wounded person, towels, handkerchiefs, bed sheets and stockings can be used for dressing.

Answer: Y

15. How should lamps be used by the motor vehicle driver who follows a vehicle on a road section at night where he street light condition is good?

A. Turn off the headlamp

B. Use high-beam

C. Turn off all lamps

D. Use low-beam

Answer: D

16. When driving on road sections where safe sight distance is affected, such as the top of a ramp, what should drivers do to ensure safety?

A. Rush through

B. Use hazard lamp

C. Cut speed and sound the horn

D. Drive at will

Answer: C

17. When a motor vehicle stops in snow, which lamp should be turned on?

A. Front and rear fog lamps, clearance lamp and rear position lamp

B. Reverse lamp, clearance lamp and rear position lamp

C. Headlamp, clearance lamp and rear position lamp

D. Hazard lamps, clearance lamp and rear position lamp

Answer: D

18. When the tire pressure is too low, what can happen when driving at a high speed?

A. Tire pressure will be unstable

B. Tire pressure will increase

C. Driving resistance will decrease

D. The tire will burst

Answer: D

19. What is the meaning of this sign?

A. No honking the tweeter

B. No honking the woofer

C. Should honk

D. No honking

Answer: C

20. When rescuing a wounded person in an emergency, it is necessary to firstly stop the bleeding by compression before other methods are taken according to the conditions of bleeding.

Answer: Y