巴彦淖尔考摩托车科目四英文试题

1. What is the meaning of this sign?

A. Electric bicycles may go

B. Parking space for non-motorized vehicles

C. Parking area for non-motorized vehicles

D. Non-motorized vehicles may go

Answer: D

2. How should lamps be used when a motor vehicle meets an oncoming bicycle on a narrow road or a narrow bridge at night?

A. Continuously change between low-beam and high-beam

B. Use clearance lamp

C. Use high-beam

D. Use low-beam

Answer: D

3. What is the meaning of this sign?

A. No changing lane

B. No left turn

C. No going straight

D. No U turn

Answer: D

4. When approaching a vehicle on a narrow slope, which one of the following ways is correct?

A. The descending vehicle yields to the ascending

B. The vehicle which is further from the slope crest should yield

C. The ascending vehicle yields to the descending

D. If the descending vehicle has reached the midpoint while the ascending vehicle has not yet set out, the descending vehicle must yield.

Answer: A

5. What is the meaning of this sign?

A. Sharp right curve

B. Bypass from right side

C. Continuous curves

D. Sharp left curve

Answer: A

6. What is the meaning of this sign?

A. Hump bridge

B. High outburst road

C. Low-lying road

D. Bump road

Answer: A

7. What is the meaning of this sign?

A. Turn right

B. One-way road

C. Going straight only

D. Straight-going lane

Answer: A

8. When a motor vehicle passes over an overflowing bridge, what should the driver do after stopping and observing closely?

A. Change to a high gear and pass rapidly

B. Constantly observe the changes of the flow

C. Prepare to stop at any time

D. Change to a low gear and pass through at a constant speed

Answer: D

9. What is the meaning of this sign?

A. Accident-prone section

B. Construction section

C. Reducing speed and going slowly section

D. Jammed section

Answer: A

10. Which lamp should be turned on when motor vehicles pass through a road section at night where the street light condition is good?

A. Front and rear fog lamps

B. Low-beam

C. High-beam

D. Hazard lamp

Answer: B

11. How should lamps be used when motor vehicle drivers pass through a two-way tunnel?

A. Turn on the hazard lamps

B. Turn on the high-beam

C. Turn on the fog lamp

D. Turn on the low-beam

Answer: D

12. When an erosive material catches fire, it should not be put out with water cannon.

Answer: Y

13. What is the meaning of this sign?

A. Embankment road

B. Steep uphill road

C. Continuous up slopes

D. Steep downhill road

Answer: D

14. What should motor vehicle drivers do when parking temporarily on a rainy day?

A. Turn on hazard lamp

B. Turn on front and back fog lamp

C. Turn on low-beam

D. Set up warning sign at the back of the vehicle

Answer: A

15. When driving in thick or extremely thick fog, what should the driver do due to the low visibility in such weather?

A. Turn on the headlamp and drive slowly

B. Turn on the fog lamp and drive slowl

C. Park in a safe place

D. Drive slowly close to the roadside

Answer: C

16. When a motor vehicle encounters a burning phenomenon, it should leave the vehicle quickly so as not to cause injury or asphyxia to the respiratory tract.

Answer: Y

17. What is the meaning of this sign?

A. Road narrows on both sides

B. Road narrows on the right side

C. Road narrows on the left side

D. Bridge narrows

Answer: A

18. When the tire pressure is too low, what can happen when driving at a high speed?

A. Tire pressure will be unstable

B. Tire pressure will increase

C. Driving resistance will decrease

D. The tire will burst

Answer: D

19. What is the meaning of this sign?

A. U turn

B. Reversing

C. Left turn

D. Bypassing

Answer: A

20. When driving on road sections where safe sight distance is affected, such as the top of a ramp, what should drivers do to ensure safety?

A. Rush through

B. Use hazard lamp

C. Cut speed and sound the horn

D. Drive at will

Answer: C