忻州考摩托车科目四英文版试题

1. When an erosive material catches fire, it should not be put out with water cannon.

Answer: Y

2. What is the meaning of this sign?

A. Crosswalk

B. Students¡¯ passage

C. Watch for pedestrians

D. Children¡¯s passage

Answer: A

3. How to ensure motor vehicles have sufficient power when driving uphill?

A. Downshift before reducing speed

B. Downshift after reducing speed

C. Downshift when the speed is excessively low

D. Downshift to the fullest extent

Answer: A

4. What is the meaning of this sign?

A. The lane for non-motorized vehicles

B. Yield non-motorized vehicles

C. No passing for non-motorized vehicles

D. Watch for non-motorized vehicles

Answer: D

5. The first-aid measure to rescue a poisoned person is to _______.

A. Take warming-up measures

B. Bring him to a place where air is fresh

C. Give him artificial respiration

D. Depress the heart over the chest

Answer: B

6. How should lamps be used by the motor vehicle driver who follows a vehicle on a road section at night where he street light condition is good?

A. Turn off the headlamp

B. Use high-beam

C. Turn off all lamps

D. Use low-beam

Answer: D

7. What is the meaning of this sign?

A. Road narrows on both sides

B. Road narrows on the right side

C. Road narrows on the left side

D. Bridge narrows

Answer: A

8. What is the meaning of this sign?

A. Straight-going lane

B. Going straight only

C. One-way road

D. No going straight

Answer: B

9. When a motor vehicle encounters an accident, the driver should pay attention to whether there is fuel leakage, pipeline rupture, so as avoid accidents.

Answer: Y

10. How should lamps be used when motor vehicle drivers pass through a two-way tunnel?

A. Turn on the hazard lamps

B. Turn on the high-beam

C. Turn on the fog lamp

D. Turn on the low-beam

Answer: D

11. How should lamps be used when a motor vehicle meets an oncoming bicycle on a narrow road or a narrow bridge at night?

A. Continuously change between low-beam and high-beam

B. Use clearance lamp

C. Use high-beam

D. Use low-beam

Answer: D

12. What should motor vehicle drivers do when approaching an oncoming vehicle on a frozen road?

A. Cut speed as approaching each other

B. Pass each other by speeding up properly

C. Pass each other slowly by cutting speed in advance

D. Pass each other along the central line to the best

Answer: C

13. What is the meaning of this sign?

A. Stopping temporarily is allowed

B. Long stopping is allowed

C. No long stopping

D. No stopping

Answer: D

14. What is the meaning of this sign?

A. No going straight and no changing to left lane

B. No going straight and no left turn

C. Allowed to go straight and turn left

D. No going straight and no right turn

Answer: B

15. When following other vehicles on the uphill section of a mountain road, what should the driver do if the vehicle in front stops?

A. Overtake from either side of the front vehicle

B. Stop close to the vehicle in front

C. Stop with a larger space from the vehicle in front

D. Sound the horn continuously to warn the other driver

Answer: C

16. What is the meaning of this sign?

A. Embankment road

B. Steep uphill road

C. Continuous up slopes

D. Steep downhill road

Answer: D

17. What is the meaning of this sign?

A. No passing

B. Driving at reduced speed

C. Time limit for entering

D. No entering

Answer: A

18. What is the meaning of this sign?

A. Going straight and left turn

B. Going straight and right turn

C. No going straight and no right turn

D. Left turn and right turn only

Answer: B

19. Rescue personnel should check the breath of the unconscious person before applying any other emergency treatment.

Answer: Y

20. Which lamp should be used when motor vehicles pass hrough an intersection at night where there is no traffic light signal?

A. High-beam

B. Low-beam

C. Hazard lamps

D. High-beam and low-beam should be used alternatively

Answer: D