鹤岗考摩托车科目四英文版试题

1. What is the meaning of this sign?

A. Hump bridge

B. High outburst road

C. Low-lying road

D. Bump road

Answer: A

2. What is the meaning of this sign?

A. Passing by the right side

B. Passing by the left side

C. Running to right side

D. Running the roundabout

Answer: D

3. When the tire pressure is too low, what can happen when driving at a high speed?

A. Tire pressure will be unstable

B. Tire pressure will increase

C. Driving resistance will decrease

D. The tire will burst

Answer: D

4. How to ensure motor vehicles have sufficient power when driving uphill?

A. Downshift before reducing speed

B. Downshift after reducing speed

C. Downshift when the speed is excessively low

D. Downshift to the fullest extent

Answer: A

5. What kind of harmful effect will be brought about by continuously using the foot brake on a long downhill road?

A. Shorten the engine¡¯s service life

B. Make the driver feel tired

C. Easily cause the vehicle to overturn

D. Reduce the braking efficiency

Answer: D

6. When a motor vehicle stops in snow, which lamp should be turned on?

A. Front and rear fog lamps, clearance lamp and rear position lamp

B. Reverse lamp, clearance lamp and rear position lamp

C. Headlamp, clearance lamp and rear position lamp

D. Hazard lamps, clearance lamp and rear position lamp

Answer: D

7. Which one of the following measures is correct when a motor vehicle intends to overtake but the vehicle infront refuses to yield?

A. Use a long-sounding horn

B. Follow the vehicle in front while turning high-beam

C. Wait for it to yield while keeping a safe distance

D. Use high-beam and low-beam alternatively

Answer: C

8. What is the meaning of this sign?

A. No stopping temporarily

B. No long stopping

C. No stopping

D. Long stopping is allowed

Answer: B

9. What is the meaning of this sign?

A. Reduce speed and go slowly

B. Watch for danger

C. Jammed section

D. Accident-prone section

Answer: B

10. How should lamps be used when a motor vehicle meets an oncoming bicycle on a narrow road or a narrow bridge at night?

A. Continuously change between low-beam and high-beam

B. Use clearance lamp

C. Use high-beam

D. Use low-beam

Answer: D

11. What is the meaning of this sign?

A. School area

B. Watch for children

C. Crosswalk

D. Watch for pedestrians

Answer: B

12. What is the meaning of this sign?

A. No U turn at intersection

B. No changing lane from both sides

C. No left or right turn

D. No going straight

Answer: C

13. When rescuing the injured, it is necessary to ________.

A. Save life first and treat the wounds later

B. Treat the wounds first and safe life later

C. Help the slightly wounded persons first

D. Help the seriously wounded persons later

Answer: A

14. What is the meaning of this sign?

A. No borrowing lane

B. No changing lane

C. No overtaking

D. No U turn

Answer: C

15. What is the meaning of this sign?

A. Turn right

B. One-way road

C. Going straight only

D. Straight-going lane

Answer: A

16. In emergencies, people¡¯s life safety should always be put in the first place.

Answer: Y

17. Which lamp should be used when motor vehicles pass hrough an intersection at night where there is no traffic light signal?

A. High-beam

B. Low-beam

C. Hazard lamps

D. High-beam and low-beam should be used alternatively

Answer: D

18. When approaching a vehicle on a narrow slope, which one of the following ways is correct?

A. The descending vehicle yields to the ascending

B. The vehicle which is further from the slope crest should yield

C. The ascending vehicle yields to the descending

D. If the descending vehicle has reached the midpoint while the ascending vehicle has not yet set out, the descending vehicle must yield.

Answer: A

19. Rescue personnel should check the breath of the unconscious person before applying any other emergency treatment.

Answer: Y

20. What is the meaning of this sign?

A. Bypass from left side

B. Continuous curves

C. Sharp left curve

D. Sharp right curve

Answer: C