合作摩托车科目四英文题和答案

1. What is the meaning of this sign?

A. Going straight and right turn

B. Going straight and left turn

C. No going straight and no left turn

D. Right turn and left turn only

Answer: B

2. Which of the following measures is incorrect when a motor vehicle stops?

A. Stop at a stipulated place

B. Avoid stopping on pedestrian streets

C. Avoid obstructing the passing of other motor vehicles and pedestrians when temporarily stops on the road

D. Stop on the non-motor vehicle lane

Answer: D

3. What is the meaning of this sign?

A. Steep downhill road

B. Continuous up slopes

C. Steep uphill road

D. Embankment road

Answer: C

4. What is the meaning of this sign?

A. Accident-prone section

B. Construction section

C. Reducing speed and going slowly section

D. Jammed section

Answer: A

5. When following other vehicles on a foggy day, what should the driver do?

A. Maintain a large safety distance

B. Turn on the high-beam

C. Turn on the low-bea

D. Sound the horn in due time

Answer: A

6. When two vehicles approach each other on a foggy day, what is the best method of safe driving?

A. Turn on the high-beam

B. Slowdown and maintain a large safety distance

C. Turn on the low-beam

D. Turn on the fog lamp

Answer: B

7. What is the meaning of this sign?

A. Hump bridge

B. High outburst road

C. Low-lying road

D. Bump road

Answer: A

8. What is the meaning of this sign?

A. No stopping temporarily

B. No long stopping

C. No stopping

D. Long stopping is allowed

Answer: B

9. What is the meaning of this sign?

A. Slippery section

B. Sharp curve

C. Inverse curve

D. Continuous curves

Answer: C

10. How to ensure safe driving at night?

A. Drive at speed limit

B. Cut speed and drive carefully

C. Maintain the current speed

D. Drive above the speed limit

Answer: B

11. How should lamps be used when a motor vehicle meets an oncoming bicycle on a narrow road or a narrow bridge at night?

A. Continuously change between low-beam and high-beam

B. Use clearance lamp

C. Use high-beam

D. Use low-beam

Answer: D

12. When following other vehicles on the uphill section of a mountain road, what should the driver do if the vehicle in front stops?

A. Overtake from either side of the front vehicle

B. Stop close to the vehicle in front

C. Stop with a larger space from the vehicle in front

D. Sound the horn continuously to warn the other driver

Answer: C

13. At the scene of a traffic accident, once there is a leakage of toxic and harmful substances, people must be evacuated at the first time and alarmed immediately.

Answer: Y

14. When an erosive material catches fire, it should not be put out with water cannon.

Answer: Y

15. Dangerous chemicals possess the characteristics of explosion, inflammation, poison, erosion and radiation.

Answer: Y

16. When rescuers enter the scene to rescue the wounded after harmful gas leakage caused by traffic accidents, they must wear air respirators or cover their mouth and nose with wet towels.

Answer: Y

17. Which lamp should be used when motor vehicles pass hrough an intersection at night where there is no traffic light signal?

A. High-beam

B. Low-beam

C. Hazard lamps

D. High-beam and low-beam should be used alternatively

Answer: D

18. When the tire pressure is too low, what can happen when driving at a high speed?

A. Tire pressure will be unstable

B. Tire pressure will increase

C. Driving resistance will decrease

D. The tire will burst

Answer: D

19. Which lamp should be turned on when motor vehicles pass through a road section at night where the street light condition is good?

A. Front and rear fog lamps

B. Low-beam

C. High-beam

D. Hazard lamp

Answer: B

20. What should be checked before driving?

A. No parts need to be checked

B. Whether the tires have been cleaned

C. Where the spare tire is placed

D. The fastening and air pressure of tires

Answer: D