包头考摩托车科目四英文版试题

1. When encountering a vehicle in front ascending on a mountainous road covered with ice and snow, what should the motor vehicle driver do?

A. Ascend after the vehicle in front passes the slope

B. Overtake the vehicle in front swiftly and drive on

C. Overtake the vehicle in front with a slow speed and drive on

D. Follow the vehicle in front closely

Answer: A

2. When driving on a long downhill road, which is the best way to control driving speed?

A. Coast in neutral gear

B. Depress the clutch and coast

C. Use the engine to brake

D. Depress the brake pedal continuously

Answer: C

3. At the scene of a traffic accident, once there is a leakage of toxic and harmful substances, people must be evacuated at the first time and alarmed immediately.

Answer: Y

4. What is the meaning of this sign?

A. No yielding

B. Yield while crossing each other

C. Reduce speed and yield

D. Stop to yield

Answer: C

5. What is the meaning of this sign?

A. Slippery section

B. Sharp curve

C. Inverse curve

D. Continuous curves

Answer: D

6. What kind of harmful effect will be brought about by continuously using the foot brake on a long downhill road?

A. Shorten the engine¡¯s service life

B. Make the driver feel tired

C. Easily cause the vehicle to overturn

D. Reduce the braking efficiency

Answer: D

7. When discovering animals crossing the expressway on the highway, the driver should not drastically turn to evade.

Answer: Y

8. Which lamp should be used when motor vehicles pass hrough an intersection at night where there is no traffic light signal?

A. High-beam

B. Low-beam

C. Hazard lamps

D. High-beam and low-beam should be used alternatively

Answer: D

9. What is the meaning of this sign?

A. Road narrows on both sides

B. Road narrows on the right side

C. Road narrows on the left side

D. Bridge narrows

Answer: A

10. Which one of the following measures is correct when a motor vehicle intends to overtake but the vehicle infront refuses to yield?

A. Use a long-sounding horn

B. Follow the vehicle in front while turning high-beam

C. Wait for it to yield while keeping a safe distance

D. Use high-beam and low-beam alternatively

Answer: C

11. What is the meaning of this sign?

A. Continuous down slopes

B. Steep downhill road

C. Steep uphill road

D. Continuous up slopes

Answer: A

12. What is the meaning of this sign?

A. A manned level crossing

B. Multi-crossing of railway and road

C. Grade separation level crossing

D. An unmanned level crossing

Answer: A

13. What is the meaning of this sign?

A. School area

B. Watch for children

C. Crosswalk

D. Watch for pedestrians

Answer: B

14. What is the meaning of this sign?

A. Watch for long time honking

B. An unmanned level crossing

C. A manned level crossing

D. Multi-crossing of railway and road

Answer: B

15. What is the meaning of this sign?

A. Driving at reduced speed in the section of 40 meters

B. Minimum speed is 40km/hr

C. Maximum speed is 40km/hr

D. 40km/hr speed limit ban is lifted

Answer: D

16. What is the meaning of this sign?

A. No entry for bicycles

B. Lane for non-motorized vehicles

C. Special lane for bicycles

D. Bicycle stopping area

Answer: B

17. Gun powder, explosives and detonating powder belong to which of the following dangerous chemicals?

A. Oxidizing materials

B. Inflammable solid materials

C. Explosives

D. Self-igniting articles

Answer: C

18. What is the meaning of this sign?

A. No long time honking

B. Honk discontinuously

C. Reduce speed and honk

D. No honking

Answer: D

19. Once inflammable gas causes a fire disaster, it should be put out with water in good time.

Answer: N

20. How should lamps be used when a motor vehicle meets an oncoming bicycle on a narrow road or a narrow bridge at night?

A. Continuously change between low-beam and high-beam

B. Use clearance lamp

C. Use high-beam

D. Use low-beam

Answer: D