枣庄摩托车科目四英文版app

1. When the tire pressure is too low, what will happen if the tire changes its shape in waves and increases in temperature due to fast movement?

A. Unstable tire pressure

B. Even lower tire pressure

C. Driving resistance increases

D. Tire burst

Answer: D

2. Dangerous chemicals possess the characteristics of explosion, inflammation, poison, erosion and radiation.

Answer: Y

3. How should lamps be used when a motor vehicle meets an oncoming bicycle on a narrow road or a narrow bridge at night?

A. Continuously change between low-beam and high-beam

B. Use clearance lamp

C. Use high-beam

D. Use low-beam

Answer: D

4. When following other vehicles on a foggy day, what should the driver do?

A. Maintain a large safety distance

B. Turn on the high-beam

C. Turn on the low-bea

D. Sound the horn in due time

Answer: A

5. What is the most frequent problem for driving on a muddy road?

A. High resistance force

B. Sideways slide

C. The motor vehicle bumps

D. Steering failure

Answer: B

6. What is the meaning of this sign?

A. No going straight and no changing to left lane

B. No going straight and no left turn

C. Allowed to go straight and change to left lane

D. No going straight and no right turn

Answer: D

7. What is the meaning of this sign?

A. No yielding

B. Yield while crossing each other

C. Reduce speed and yield

D. Stop to yield

Answer: C

8. When a motor vehicle temporarily stops in fog, which lamp should be turned on?

A. Hazard lamp, clearance lamp and rear position lamp

B. Left-turn indicator, clearance lamp and rear position amp

C. Headlamp, clearance lamp and rear position lamp

D. Reverse lamp, clearance lamp and rear position lamp

Answer: A

9. When there is bleeding at the bone fracture of a wounded person, the first thing to do is to fix the wounded part in position, then stop the bleeding and dress the wound.

Answer: N

10. When driving on a long downhill road, which is the best way to control driving speed?

A. Coast in neutral gear

B. Depress the clutch and coast

C. Use the engine to brake

D. Depress the brake pedal continuously

Answer: C

11. When approaching another vehicle at night, why should the driver alternate between high-and-low-beam at a distance more than 150 meters?

A. Warn each other before passing

B. Driving habit

C. Easy to observe the situation ahead from either side

D. Courtesy

Answer: C

12. What is the meaning of this sign?

A. Straight-going lane

B. Going straight only

C. One-way road

D. No going straight

Answer: B

13. What is the meaning of this sign?

A. Slippery section

B. Sharp curve

C. Inverse curve

D. Continuous curves

Answer: D

14. Which of the following method is correct to rescue an unconscious person?

A. Apply cardio-pulmonaryresuscitation immediately

B. Press the philtrum of the wounded person with force

C. Continuously slap the face of the wounded person

D. Check the breath of the wounded person before other emergency treatments

Answer: D

15. When a motor vehicle encounters a burning phenomenon, it should leave the vehicle quickly so as not to cause injury or asphyxia to the respiratory tract.

Answer: Y

16. How should lamps be used by the motor vehicle driver who follows a vehicle on a road section at night where he street light condition is good?

A. Turn off the headlamp

B. Use high-beam

C. Turn off all lamps

D. Use low-beam

Answer: D

17. When a wounded person suffering burns is thirsty, he may drink a small quantity of slightly salty water.

Answer: Y

18. What influence does smoking have upon driving?

A. Harmful for safe driving

B. Increase concentration

C. Help relaxation

D. No effect on driving

Answer: A

19. When a wounded person is under the wheel or cargo, the wrong method is to pull the limbs of the wounded.

Answer: N

20. What is the meaning of this sign?

A. No stopping temporarily

B. No long stopping

C. No stopping

D. Long stopping is allowed

Answer: B