漳州摩托车科目四英语版

1. How to ensure motor vehicles have sufficient power when driving uphill?

A. Downshift before reducing speed

B. Downshift after reducing speed

C. Downshift when the speed is excessively low

D. Downshift to the fullest extent

Answer: A

2. What is the meaning of this sign?

A. Electric bicycles may go

B. Parking space for non-motorized vehicles

C. Parking area for non-motorized vehicles

D. Non-motorized vehicles may go

Answer: D

3. Which of the following is an inflammable solid material?

A. Matches

B. Fireworks

C. Calcium carbide

D. Explosives

Answer: A

4. What is the meaning of this sign?

A. Going straight and right turn

B. Going straight and left turn

C. No going straight and no left turn

D. Right turn and left turn only

Answer: B

5. When encountering a vehicle in front ascending on a mountainous road covered with ice and snow, what should the motor vehicle driver do?

A. Ascend after the vehicle in front passes the slope

B. Overtake the vehicle in front swiftly and drive on

C. Overtake the vehicle in front with a slow speed and drive on

D. Follow the vehicle in front closely

Answer: A

6. When a motor vehicle stops temporarily in a rainy day,which lamp should be turned on?

A. Front and rear fog lamps

B. Hazard lamps

C. Headlamps

D. Reverse lamps

Answer: B

7. What is the meaning of this sign?

A. Embankment road

B. Steep uphill road

C. Continuous up slopes

D. Steep downhill road

Answer: D

8. Once inflammable gas causes a fire disaster, it should be put out with water in good time.

Answer: N

9. What is the meaning of this sign?

A. Passing by the right side

B. Passing by the left side

C. Running to right side

D. Running the roundabout

Answer: D

10. What is the meaning of this sign?

A. Continuous down slopes

B. Steep downhill road

C. Steep uphill road

D. Continuous up slopes

Answer: A

11. What is the meaning of this sign?

A. No entry for bicycles

B. Lane for non-motorized vehicles

C. Special lane for bicycles

D. Bicycle stopping area

Answer: B

12. How should lamps be used by the motor vehicle driver who follows a vehicle on a road section at night where he street light condition is good?

A. Turn off the headlamp

B. Use high-beam

C. Turn off all lamps

D. Use low-beam

Answer: D

13. How to reduce speed or stop when driving on a road covered with snow and ice?

A. Take full advantage of driving brake

B. Take full advantage of the control power from engine

C. Take full advantage of parking brake

D. Take full advantage of speed retarder

Answer: B

14. What is the meaning of this sign?

A. Slippery section

B. Sharp curve

C. Inverse curve

D. Continuous curves

Answer: D

15. Which of the following is a bad habit when changing lanes?

A. Turning on the indicator in advance

B. Observing closely before changing a lane

C. Change lanes at will

D. Not obstructing the passing of other normally moving vehicles

Answer: C

16. What is the meaning of this sign?

A. No stopping temporarily

B. No long stopping

C. No stopping

D. Long stopping is allowed

Answer: B

17. What needs attention when a motor vehicle drives on a road covered with ice and snow?

A. Braking length is extended

B. Anti-skating resistance will be greater

C. The adhesive force of the road will be greater

D. The braking length will be shorter

Answer: A

18. In emergencies, people¡¯s life safety should always be put in the first place.

Answer: Y

19. How will the adhesive force of road change when speed increases on a damp and slippery road?

A. Increase sharply

B. Increase gradually

C. Decrease sharply

D. No change

Answer: C

20. What is the meaning of this sign?

A. Going straight and left turn

B. Going straight and right turn

C. No going straight and no right turn

D. Left turn and right turn only

Answer: B