景德镇考摩托车科目四英文版试题

1. What should motor vehicle drivers do when approaching an oncoming vehicle on a frozen road?

A. Cut speed as approaching each other

B. Pass each other by speeding up properly

C. Pass each other slowly by cutting speed in advance

D. Pass each other along the central line to the best

Answer: C

2. What is the meaning of this sign?

A. Passing by the right side

B. Passing by the left side

C. Running to right side

D. Running the roundabout

Answer: D

3. When a motor vehicle passes over an overflowing bridge, what should the driver do after stopping and observing closely?

A. Change to a high gear and pass rapidly

B. Constantly observe the changes of the flow

C. Prepare to stop at any time

D. Change to a low gear and pass through at a constant speed

Answer: D

4. What is the meaning of this sign?

A. Slippery section

B. Sharp curve

C. Inverse curve

D. Continuous curves

Answer: D

5. What is the meaning of this sign?

A. No honking the tweeter

B. No honking the woofer

C. Should honk

D. No honking

Answer: C

6. When driving on a long downhill road, which is the best way to control the speed?

A. Coast in neutral gear

B. Take a low gear

C. Depress the clutch

D. Pull up the handbrake

Answer: B

7. What is the meaning of this sign?

A. Y-shaped intersection

B. T-shaped intersection

C. Intersection

D. Ring intersection

Answer: B

8. When driving on road sections where safe sight distance is affected, such as the top of a ramp, what should drivers do to ensure safety?

A. Rush through

B. Use hazard lamp

C. Cut speed and sound the horn

D. Drive at will

Answer: C

9. What is the meaning of this sign?

A. Road narrows on both sides

B. Road narrows on the right side

C. Road narrows on the left side

D. Bridge narrows

Answer: B

10. How should lamps be used when a motor vehicle meets an oncoming bicycle on a narrow road or a narrow bridge at night?

A. Continuously change between low-beam and high-beam

B. Use clearance lamp

C. Use high-beam

D. Use low-beam

Answer: D

11. What needs attention when a motor vehicle drives on a road covered with ice and snow?

A. Braking length is extended

B. Anti-skating resistance will be greater

C. The adhesive force of the road will be greater

D. The braking length will be shorter

Answer: A

12. When encountering an obstacle on one side of the road, what should vehicles do as they approach each other?

A. The vehicle not encountering an obstacle should Yield to the other vehicle

B. The slower vehicle should yield to the faster

C. The vehicle encountering an obstacle should yield to the other vehicle

D. The faster vehicle should yield to the slower

Answer: C

13. What is the meaning of this sign?

A. Embankment road

B. Steep uphill road

C. Continuous up slopes

D. Steep downhill road

Answer: D

14. What is the meaning of this sign?

A. Going straight and left turn

B. Going straight and right turn

C. No going straight and no right turn

D. Left turn and right turn only

Answer: B

15. When driving in rain and encountering pedestrians with umbrellas or wearing raincoats, what should be done by motor vehicle drivers in order to yield?

A. Drive at a normal speed

B. Sound the horn to alert when approaching the pedestrians

C. Speed up and bypass on the left

D. Reduce speed and sound the horn in advance

Answer: D

16. When a wounded person is unable to get off the vehicle by himself, he should be removed from the vehicle so as to avoid a secondary injury.

Answer: Y

17. How to ensure safe driving at night?

A. Drive at speed limit

B. Cut speed and drive carefully

C. Maintain the current speed

D. Drive above the speed limit

Answer: B

18. Which one of the following measures is correct when a motor vehicle intends to overtake but the vehicle infront refuses to yield?

A. Use a long-sounding horn

B. Follow the vehicle in front while turning high-beam

C. Wait for it to yield while keeping a safe distance

D. Use high-beam and low-beam alternatively

Answer: C

19. Which of the following is an inflammable solid material?

A. Matches

B. Fireworks

C. Calcium carbide

D. Explosives

Answer: A

20. When rescuing a wounded person in an emergency, it is necessary to firstly stop the bleeding by compression before other methods are taken according to the conditions of bleeding.

Answer: Y